NYC DOB CRANES AND DERRICKS TRAINING
The NYC DOB-approved refresher rigging supervisors take every 4 years to keep the Rigging Supervisor certification on their Worker Wallet card. Master Riggers also need it to renew.
Construction Safety Consultants LLC · NYC DOB provider ID CP041 · DOB course ID CRA-401.
$450.00
In person · Live online · Hybrid
This course is taught in scheduled classes. Pick a date below. Buying for others? Choose more seats; you'll name each person at checkout.
Check the prerequisitesPick a class date and reserve your seat.
The 16-Hour Rigging Supervisor Refresher is NYC DOB-approved training for people who finished the 32-Hour Rigging Supervisor course and need to keep supervising the hoisting or lowering of loads on the outside of a building. It applies when you are not a licensed rigger or a licensed rigger's designated foreman.
Under NYC Building Code section 3316.9.2, a rigging supervisor must take a refresher of at least 16 hours 4 years after the initial course and every 4 years after that, unless they hold an accepted national certification such as NCCCO Rigger Level II plus NCCCO Signalperson. If you miss the deadline, the refresher still counts if you finish it within 1 year after your last course expired, but you may not supervise that work until you do. After more than 1 year, you must retake the 32-hour course.
Licensed Master Riggers also need this course. Within the year before each license renewal, they must finish a rigging supervisor course of at least 16 hours and a DOB-approved Lift Director course of at least 8 hours.
The refresher covers the same areas as the 32-hour course, focused on changes since your last course: crane inspection and setup, load charts, rigging math, building structure, and DOB, NYC DOT, and NYC Transit rules. It has no hands-on component, so DOB allows it in person, live online, or as a hybrid. It is instructor-led, taught in English, and never self-paced. It ends with a written multiple-choice test, and your training provider issues the renewed certification on your Worker Wallet card.
You need the following before you can take this course.
Drawn from the training objectives in DOB's outline.
Everything in DOB's outline for this course.
Renews your Rigging Supervisor certification on your DOB Worker Wallet card, issued by your training provider through DOB Training Connect. It also meets the rigging supervisor course requirement for Master Rigger license renewal.
Renewal: Repeat this 16-hour refresher every 4 years. Master Riggers take it within the year before each license renewal.
Yes. This course has no hands-on part, so DOB allows it in person, live online, or as a hybrid, but not self-paced. For live online classes, your identity is confirmed before you get access, you attest that you will complete the training without help, your participation is monitored, and your webcam stays on for the whole class.
4 years after you finished the 32-Hour Rigging Supervisor course, and every 4 years after that. If you miss the deadline, it still counts if you finish within 1 year after your last course expired, but you cannot supervise that work until you complete it. After more than 1 year, you must retake the 32-hour course.
Your training provider issues the renewed Rigging Supervisor certification on your DOB Worker Wallet card through DOB's Training Connect platform, and may charge an administrative fee for the card. It is the only card accepted for this certification on NYC job sites.
It meets one course requirement, but it does not renew the license by itself. Within the year before renewal, you need this course and a DOB-approved Lift Director course of at least 8 hours, and you still file your renewal with DOB.
Rigging supervisors who are not licensed riggers or a licensed rigger's designated foreman and who rely on DOB training instead of a national certification. Licensed Master Riggers need it for renewal.
The refresher is for people who already finished the 32-Hour Rigging Supervisor course. It is taught in English, so you need to read and write English.
Yes. The Worker Wallet card holds certifications like Rigging Supervisor, but it does not replace your SST card. You carry both.
Includes your NYC DOB Worker Wallet card at no extra cost. If you already have one, this course's credential is added to it. Worker Wallet card only, without our training: $50.00. Replacement Worker Wallet card: $50.00.
We're here to help you find the right training for your needs.
Contact usPick a class date. Times are shown in the class's local time zone.
No classes are scheduled right now.
Contact us