WORK ZONE TRAFFIC CONTROL TRAINING
Learn the signals, equipment and positioning rules in Part 6 of the MUTCD, and how to find out what the job you are sent to requires. Online and self-paced.
Start as soon as your order is confirmed, and work at your own pace.
This 4-hour course trains you to work as a flagger in a temporary traffic control zone. It is built on Part 6 of the Manual on Uniform Traffic Control Devices (MUTCD), the federal manual that sets out how flaggers are dressed and equipped, where they stand and how they signal. For construction work, OSHA's rule at 29 CFR 1926.201(a) requires flagging to follow Part 6.
There is no federal flagger card. Whether you need a card, and which training counts, is decided by the road authority, the contract or permit for the job, and your employer. In New York, state DOT contracts carry their own flagger requirements, and work on city streets may be governed differently. This course does not claim to meet any specific state or agency certification. Before you rely on it for a job, ask your employer what the contract requires.
You learn the four areas of a work zone and where you stand in them, the high-visibility apparel you must wear, and the stop, proceed and slow signals with a STOP/SLOW paddle and with a flag. You learn how to pick a station that gives drivers room to stop and gives you a way out, how two flaggers run a one-lane two-way operation, and what changes at night and in bad weather. The last module covers dealing with angry drivers and keeping your training record current.
The course is online and self-paced, with narrated slides and MUTCD figures in 12 modules. Each module ends with a knowledge check, and a final exam closes the course. You need 70% to pass. Seat time is tracked, so the course takes at least 4 hours. You will be asked to verify your identity.
Built on Part 6 of the MUTCD.
Every module in the course, grouped by topic.
A certificate of completion showing you finished flagger training. It is a training record, not a state certification or license, and it is not SST credit.
No. There is no federal flagger certification. Card and training requirements come from a state, a road authority or the contract for the job.
No. This course does not claim to meet any state certification. On New York jobs, the road authority and the contract decide which training is accepted, so check with your employer before you rely on it.
No. It is not an NYC DOB SST course. DOB's SST catalog lists a separate 1-hour Flag Person specialized elective for SST credit.
Part 6 of the MUTCD, 11th Edition, which covers temporary traffic control, and OSHA's construction rule at 29 CFR 1926.201(a), which requires flagging on construction work to follow Part 6.
No. The course is online and teaches each signal using the MUTCD figures. Your employer may want to watch you give the signals before putting you on a station, and you should practice before your first shift.
A certificate of completion with your name, the course and the date. Keep a photo of it and give your employer a copy.
There is no national expiration date for flagger training. The renewal interval comes from whichever agency or contract requires the training, so check the job's requirements.
No. You can work at your own pace, but seat time is tracked and the course cannot be completed in less than 4 hours.
We're here to help you find the right training for your needs.
Contact us